Assessment Validation: A Detailed Guide to Validate Assessments
Assessment Validation: A Detailed Guide to Validate Assessments
Blog Article
With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
Put simply, validation checks which parts of an RTO's assessment process are accurate and spots areas for enhancement. A proper understanding of its main elements can make validation less daunting.
Clause 1.8 of the SRTOs 2015 mandates that RTOs ensure their assessment systems, including RPL, are compliant with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
The standards necessitate conducting two types of validation.
The initial validation type checks that your RTO's assessments align with the training package requirements.
The next validation ensures that assessments are conducted per the principles of assessment and rules of evidence.
Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.
What are the Two Types of Assessment Validation?
Understanding Assessment Validation
As noted earlier and in previous blog posts, validation comprises two stages: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.
On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
This discussion will center around assessment tool validation.
Conducting Assessment Tool Validation
Having outlined the two types of validation, it’s time to dive into assessment tool validation.
Optimal Timing for Assessment Tool Validation
The purpose of assessment tool validation is to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.
This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.
You don't have to wait until your next 5-year validation schedule. Validate new resources right away to ensure they’re appropriate for student use.
Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:
- you update your resources
- new training products get added on scope
- your course includes training product updates
- learning resources get identified as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based approach to regulation means RTOs must conduct regular risk assessments. Complaints from students about learning resources signal the need for assessment tool validation.
Identifying Training Products for Validation
Do not forget, this validation ensures compliance of all learning resources before they are used. All RTOs must validate resources for each unit.
What You Need for Assessment Tool Validation
Study Resources
Since you are validating your assessment tools, you will require the entire suite of your learning resources:
Mapping tool – this should be the first document to examine. It shows which assessment items correspond to unit requirements, facilitating quicker validation.
Learner/student workbook – assess its appropriateness as an assessment tool. Confirm clear instructions and adequate answer fields. This is a common problem.
Assessor guide/marking guide – check that instructions for assessors are adequate and that there are clear benchmarks for each assessment item. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – such as checklists, registers, and templates created independently from the workbook and marking guide. Validate them to ensure they are suitable for the assessment task and address unit requirements.
Validation Panel
Clause 1.11 specifies the criteria for validation panel members, indicating that validation can involve one or more persons. RTOs usually require all trainers and assessors to participate, sometimes including industry experts.
Your validation panel must, as a group, possess:
Current vocational competencies and relevant industry skills for the unit being validated
Up-to-date knowledge and skills related to vocational teaching and learning
Either of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or an equivalent successor
Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool helps in both the validation process and documentation. It makes it simpler to see how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves as documented proof that you have validated your resources before student use.
Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are accessible online. These tools typically have validators examine the tools in their entirety to determine if they meet the principles of assessment.
Assessment Principles Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.
We strongly recommend using a more detailed template to inspect each unit requirement and the assessment items that map to them. Here is an example:
Element Performance Criteria Assessment Instructions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Inspect?
As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.
Fundamental Principles of Assessment
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?
Flexibility – Are different options provided in the assessment to demonstrate competence based on individual needs and preferences?
Validity – Is the assessment assessing what it is intended to assess? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment produce the same results each time, regardless of who conducts the training? Will different assessors make consistent decisions on skill competence?
Key Rules of Evidence
Validity – Is the evidence demonstrating that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to confirm the learner has the required skills and knowledge?
Authenticity – Does the assessment tool ensure that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?
Even though these are regularly addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:
Walk the Talk
Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
change diapers
bottle preparation, feeding babies from bottles, and cleaning equipment
prepare solid food and feed infants
respond properly to infant signs and cues
settle babies for sleep and prepare them
monitor and encourage suitable physical exploration and gross motor skills for the age
Having students explain the process of nappy changing for babies under 12 months old doesn’t fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge website (i.e., knowledge evidence), students should be carrying out the tasks.
Mind the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.
All Requirements or Not Competent
Pay attention to lists. Again, as illustrated above, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail
Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students or assessors. For example:
What kind of information can be included in a work package?
What types of information can be included in a work package?
The answer might include:
Compulsory resources
Applicable costs
Activity length
Assigned functions and responsibilities
If an assessment item requires multiple answers, specify the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.
The same is true for assessment items with double-barrelled questions or those asking for multiple answers at once. Such questions can confuse both students and assessors, as demonstrated in the sample question below:
Identify a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Answers might include, but are not limited to:
Weather conditions – isolation of work area, engineering controls, personal protective equipment
Work area and ground conditions – eliminating hazards, isolating, engineering controls
People – isolation, use of engineering controls, administration
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolation, use of engineering controls, administration
Equipment or machinery – isolating, use of engineering controls, administration
Avoiding double-barrelled questions makes it easier for students to answer and for assessors to judge competence accurately.
Seeing these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees mean you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s wiser to take a safe and compliant approach.